Can I Use Friendship Bracelet Thread For Embroidery?


More threads get added, to make the bracelet colorful and wide. Teenagers earlier wore these. Now everyone across the world adorns friendship band as a token of affinity for their friend.


They get worn on various occasions, including daily activities, since the embroidery thread will not get damaged with wear and tear, including moisture.


So, can I use friendship bracelet thread for embroidery? It depends upon what kind of embroidery material has been used on the friendship bracelet. If the friendship bracelet embroidery has cotton, silk, wool, and rayon yarns then you can use the material for embroidery. Without the cotton, silk, wool and rayon you cannot do embroidery.


Background


Friendship or decorative bracelets can get traced to China in 300 B.C. These bracelets later get surfaced in South American countries. The significance of these bracelets was that a friend creates these friendship bracelets on their own. Gifts it to their friend to be worn for a particular purpose. Once this vow gets fulfilled, the bracelet gets removed, and not before.


Including the use of this band for friendship, religion, and various essential events used these bracelets, as support for these activities. Finally, in the 1980s, these bracelets officially got established as modern friendship bracelets and quickly spread the usage across the whole world.


How Do You Make A Friendship Bracelet


There are various DIY ideas to create friendship bracelets. Let’s see how we can go about creating a band on our own. You need embroidery thread or yarn, scissors, and fastening pins. Here are the steps.


Embroidery Thread


Choose six pure embroidery yarn, floss, or thread. Additional two more threads could get added if you wish to create broader bracelets. You can either choose single or multiple colors, depending upon how you want the bracelet to appear.


If your wrist is 6 inches, take six times the number for each of these threads, i.e., 36-inch strand length. In case you increase the number of threads, the length of the yarn has to get enhanced by another few inches. This additional length gets utilized during the knotting process.


Anchoring


Create an overhand knot at one end with all the threads. Fix this knot with a securing pin on your workstation. Tie the next knot, where the bracelet knitting will commence. Once the braiding gets completed, tie another overhand knot to secure the design.


Design Of The Bracelet


Depending upon the type of knots used along with the number of strands, the design will change. If you keep two similar color strands, the final design will look different from all threads of varied hues.


Once the 3-4 inches of the bracelets get made, complete braiding both ends so you can tie the band onto the wrist of your friend. The braids get so done, that as and when required, you could remove and wear the bracelet again. Here are some popular friendship bracelet designs:


Dainty Heart Bracelet


The suede cord gets used in making this simple heart-shaped knot at the center of the bracelet.


Classic Bracelets


You can use embroidery strands to create the classic fishtail designs. One end can have a wooden bead, while the other could have a loop.


Macrame Ring Bracelet


Create a macrame design with a similar color tone, and attach metallic ring variations at the center of this bracelet.


Monochromatic Intricate Design


Use similar color embroidery cord, and create an intricate design to give a sophisticated look to the bracelets.


Tribal Bracelets


When you use various colored threads in your bracelet design, it provides an earthy look. By adding beads and loops, you complete this ethnic design.


Weave Pattern


You can create a wave pattern with the embroidery thread, leading to beautifully layered bracelets.


Nautical Knot


Use colorful cords to create nautical knots at the bracelet’s center to give it an elegant look.


Wrapped Bracelet


Choose open light-weight metal support, which will not react with moisture. Wind colorful satin threads around this structure to give this bracelet an elegant feel. The ends of the bracelet have a bead and loop to fasten this friendship band.


Beaded Bangle


Attach a string of beads along the center of the essential friendship bracelet to give you a new look band. These beads must be small.


Embroidery


Various types of yarns and designs can get derived in embroidery. Hand embroidery is quite expensive since labor dependent. These days, we have machine-made embroidery, which is far cheaper.


Finer the work, more costly will be your garments. The quality of the threads plays an essential role in the texture of the designs.

Materials


You require two essential materials for embroidery – needle, and thread. Let’s look at both these in little more detail.


Needle


This is an essential item that gets required in embroidery craft. There are various needle sizes and types for this activity.


Embroidery Hoop


For surface embroidery, a circular hoop gets used to stretch the fabric to ease the embroidery process.


Embroidery Thread


Let us look at different kinds of thread options that get used in embroidery. In needlework, quality and variety of thread play a significant part in the final design outcome. Following are some hand embroidery thread options:


Filoselle


This is a string of embroidery floss, made from the leftover waste of reeled silk yarn.


Crewel Yarn


A two-ply yarn of wool or it’s acrylic version is known as crewel yarn.


Matt Embroidery Cotton


Twisted five-ply thread, which has a matte finish, also gets known as French Coton a Broder.


Embroidery Floss


This six-strand thread, usually made from cotton, is slightly glossy. They also get made from silk, rayon, and linen, though cotton floss is a standard thread for cross-stitch.


Medica


Light-weight wool thread, which is fine, gets to be known as Medici or broder medici.


Persian Yarn


Three-strand yarn made from wool or acrylic, and are generally loosely twisted.


Perle Cotton


This French Coton Perle is two-ply s-twisted yarn, have a high sheen, and comes in five sizes – 3 to 16. Here number 3 is heavier, while number 16 is the finest size.


Tapestry Yarn


Tightly twisted four-ply yarn is also known as tapestry wool.

Machine embroidery threads get made from rayon and polyester. The first-hand embroidery machine got invented in France in 1832. Over the years, advanced forms of embroidery machines have got evolved, and large-scale garment manufacturer uses this technique.


Classification


variations


Surface Embroidery


In this free or surface embroidery, designs get made on all types of fabrics or materials. Chinese and Japanese embroidery are examples of this type.


Counted thread embroidery


Cross-stitch embroidery is an example of this kind of embroidery. Here, the base fabrics need to have proper weaves to count and make your embroidery pattern.


Needlepoint


Canvas work embroidery consists of embroidery work, where the design covers the base fabric with the required texture.


Cutwork


In this type of embroidery, the base fabric gets cut as per the required design. Then use the same color embroidery thread to create a unique design. You can also use contrast colored thread to create attractive floral designs.


Friendship Bracelet Thread And Embroidery


In friendship bracelets, we use various types of materials, including embroidery threads. The threads, floss, yarn, and cords get used in bracelet making. These are made into knots, braids, or wound tightly, by hand. If the threads are too delicate, many such yarns get taken to create a thicker strand for the bracelets.


Conclusions


Embroidery gets done with various types of yarns and threads, especially those that can get used with needles. Different types of ply, and structure of this yarn gets used for application in various designs. Cotton, silk, wool, and rayon yarns get used for embroidery.


Friendship bracelets use embroidery threads, among many other threads and cords. Since the bracelets get made by hand, the thickness of these threads must be tough enough to create knots and braids. The bracelets must not be flimsy but sturdy and robust, to get worn over a long period.


Those embroidery threads, which get threaded into needles for excellent embroidery work, can get used. Hence, all threads of friendship bracelets cannot get used in embroidery. Only those threads, yarns, and floss from cotton, wool, silk, and rayon get used.


These threads must be between two to six-ply and must be slightly twisted. This provides the sheen, gloss, or matt finish to your embroidery design. These yarn must have the required tensile strength to withstand the wear and tear of the fabric. Those yarns that get easily broken or too thick that they cannot get used in embroidery.

12 views0 comments

Recent Posts

See All